Centrifugal Pumps

Zeutech series ZP-E-63400, ZP-E-63500 ZP-61100 open Impeller with streamlined flow path, non-choke able and maintenance free. Solidly sealed front cover. Design for maximum reliability.
high efficiency/ heavy duty ZEUTECH industrial centrifugal pumps are of highest quality construction, manufactured from stainless steel. Housing, front cover and impeller are precision castings, produced by the 'lost-Wax'-method or from solid forgings. Both methods of construction offer a guarantee of precision and non-porous surfaces, every pump has a minimum wall thickness of 8 to 10 mm, providing a working life of cover 25 years. Thousands of units have proved themselves on numerous installations.
Our perfected pump design offers the following advantages:
Optimum efficiency up to 75% with open impeller achieved by high precision volute design.

• Considerable energy saving 
• Low shear displacement 
• Low noise level 
• Minimum reticulation in pump housing 
• Maximum product security in operation. 

The flow path has been specially designed to provide a gradually increasing cross section towards the pump discharge. In conjunction with open impeller and variably pitched vanes. This provides the ideal centrifugal flow path. ZEUTECH Pumps operate successfully worldwide. ZEUTECH will solve your hygienic pumping problems. Universal, gentle fluid handling, robust, low-maintenance, long life, economic, Zeutech centrifugal pumps are the optimal solution for any pumping task. ZEUTECH offers a modern range of centrifugal pumps which is systematically aimed at the products and pumping tasks of users. ZEUTECH ZP/ZPS Pumps are solely equipped with open impeller which are unsurpassed in hygienic applications. Customized steel alloys and solid components with minimum wall thickness of 6 to 8mm provide the ideal basis for problem-free operation. The Zeutech ZP/ZPS design principle gurantees high level of efficiency. Minimal secondary flow and an flow optimized pumping channel handle the fluid gently and minimize warming. The fluids pumped may contain air or other gas, be homogeneous or contain additives; and visocity up to 1,200 mPas also are no problem. Low NPSH levels permit use under unfavorable intake conditions. The extremely low-vibration running of the ZEUTECH ZP/ZPE Pumps supports the high reliability and long life of the mechanical seals. Double mechanical seals make the pumps suitable for operations under vacuum conditions and prevent damage to the products by contamination as well as environmental pollution due to product emissions. ZEUTECH ZP/ZPE pumps of course, can be used for cleaned-in-place and sterilization.

SIZES: ZP/ZPE 

• 16 Sizes for System pressure of 12-25 Bar. 
• Discharge pressure upto 15 Bar. 
• Flow rate upto 1000 m3/hr.

Note:All the technical descriptions as detailed by the clients are taken into serious consideration before the job work. Customized as per our client’s requirements.

Universal, gentle fluid handling, robust, low-maintenance, long service life, cost-effective ZEUTECH premium centrifugal pumps are the optimal, solution for all pumping problems.

Application Excellent suction performance makes it possible to use these pumps even under unfavorable inlet conditions low (NPSHA). The high reliability and long service life of the mechanical seal are supported by the extremely low-vibration of ZEUTECH ZP pumps during operation. Double mechanical seals facilitate operation under evaporating conditions and prevent product contamination and environmental pollution spillage. ZEUTECH ZP and ZPE pumps are fully suitable for CIP and can be sterilized.

Sizes: ZP/ZPE :

• 5 Sizes for System pressure of 12-25 Bar. 
• Discharge pressure upto 15 Bar. 
• Flow rate upto 1000 m3/hr. 

Design : ZEUTECH offers a modern range of centrifugal pumps which is consistently aimed at the products and application problems of the users. All ZEUTECH ZP pumps are equipped with open impellers. This is the ideal design for us in hygienic applications. Specially selected stainless steel alloys and solid components with minimum wall thicknesses of 6mm provide the ideal basis for problem-free operation. The ZEUTECH ZP design principle guarantees high efficiency. The open impellers, combined with the flow optimized pumping channel, ensure re-circulation while guaranteeing the product is handled utmost care. Liquid to be pumped contain air and gas and may be homogeneous or contain additives; and viscosity up to 1,200 mpas also are no problem.

A high volume sanitary pump for product transfers in high volume applications. This pumps is very well suited for filtration memorane systems.The inlet and outlet pipe of 6 inch diameter keeps the product velocity low at the high volume capacity of the pump. This features allows high pressure centrifugal pump, high discharge centrifugal pump to handle the product at a low shear. The pipe connections are standard Tri-Clamps. A single mechanical seal or double mechanical seal is used at the shaft seal. The pump is driven by a standard foot mounted motor. A flexible coupling connection motors and pump shaft. The motor and the pump are mounted on a base plate.

Size: ZP/ZPE

• 8 Sizes for System pressure of 12-25 Bar
• Discharge pressure upto 15 Bar
• Flow rate upto 1000 m3/hr.

Backed with years of experience, we are able to deliver a comprehensive assortment of high discharge pumps. The range which we offer has an extensive demand for wide voltage fluctuation condition (300/440 volts). Our pumps also find wide usage for discharging water particularly for pawns projects, salt-pans and storm water. Clients can avail these pumps for the supply of both potable water and sea water. Manufactured using superior grade stainless steel and aluminum, these pumps deliver 4500 LPM at 6 meter head.

Some other features of these pumps are mentioned below:

 

• Low energy consumption
• High speed
• Low maintenance cost